1. Products
  2. END ARMATUREN
Public Pricelist

END ARMATUREN

END ARMATUREN - WGEB-GG-NBR-125-MW
Knife-Gate-Valve bidirect., GG25/NBR, DN125, PN10body: GG25, knife: stainless steel
END ARMATUREN - WGEB-GG-EPDM-125-MW
Knife-Gate-Valve bidirect., GG25/EPDM, DN125, PN10body: GG25, knife: stainless steel
END ARMATUREN - WGE-GG-NBR-125-ML
Knife-Gate-Valve, GG25/NBR, DN125, PN10body: GG25, knife: stainless steel
END ARMATUREN - WGE-GG-EPDM-125-ML
Knife-Gate-Valve, GG25/EPDM, DN125, PN10body: GG25, knife: stainless steel
END ARMATUREN - WAM30013
Cuff-WA / WM, DN200, FKMwith 2pcs. additional reinforcement rings
END ARMATUREN - MEMF2S341643025-C
2/2-solenoid valve, DN25, st. steel/EPDM, 230VAC0.5-16bar, servo assisted
END ARMATUREN - MEMF2S342243025-C
2/2-solenoid valve, DN25, st. steel/EPDM, 24VDC0.5-16bar, servo assisted
END ARMATUREN - ZP311004-NE052100
Ball valve ZP, DN25, with actuator NE05, 24V DCstainless steel 1.4408/PTFE-FKM, oper. time ca.10s
END ARMATUREN - ZP311004-NE054100
Ball valve ZP, DN25, with drive NE05stainless steel1.4408 / PTFE FKM, 230V 50Hz, run-t
END ARMATUREN - ZA310027-HT-NE052100
Ball valve-ZA/HT,11/2"-female thread,actuator NE05Stainl. steel/PTFE-FKM, 24V DC, oper. time ca.10s
END ARMATUREN - ZA310066-HT-NE052100
Ball valve-ZA/HT, DN40-welded ends, actuator NE05Stainl. steel/PTFE-FKM, 24V DC, oper. time ca.10s
END ARMATUREN - ZA310027-HT-NE054100
Ball valve-ZA / HT, 11/2 "-Innengew., With drive-NStainless steel / PTFE FKM, 230V 50Hz, term 14sek.
END ARMATUREN - MP311008-OD620852
Ball valve MP, DN65, with actuator-OD, DA85Stainless steel 1.4408, PTFE-FKM, double acting
END ARMATUREN - VO551008-ED620702
Ball valve VO, DN65, with drive-ED, DW70Cast iron-25, stainless steel 1.4301, PTFE PTFE /
END ARMATUREN - KA110029-NE052100
Ball valve-KA, 21/2", with actuator NE05brass/PTFE-FKM, 24V DC, running time approx 10sec.
END ARMATUREN - KA110029-NE054100
Ball valve-KA, 21.2 ", with drive-NE05brass/PTFE-FKM, 230V 50Hz, term 14sek.
END ARMATUREN - TM532011-ED620852
Butterfly valve LUG, DN125, with drive-ED, DW85Cast ironG / steel / NBR, double acting
END ARMATUREN - MK311008-ED620852
Ball valve MK, DN65, with drive-ED, DW85Stainless steel 1.4408 / PTFE FKM, double acting
END ARMATUREN - ADF2D5122040
Pressure actuated valve, DN40, SK80-brassCast iron / PTFE, PN16, to rest against Medium
END ARMATUREN - DR334011
Double plate check valve, DN125, PN16Stainless steel / EPDM / stainless steel